home depot

Description

* PLEASE LIKE Video * * PLEASE LIKE Video * * PLEASE LIKE Video * Fully Illustrated Video on How to make a .22 / .22lr Homemade Zip Gun from Items at Home Depot for under $20 .. All you need is a Drill and $20 Bill NOTE: If You are Using a Gun Adapter that is to Fire a .22 Make a Custom Request that the TOP Countersink for the .22's Rim is NOT added to it. If you do not mention this and fire it. The Firing pin will NOT hit the shell. If worse for worse happens. Simply just put a Good Quality Epoxy and fill that countersink in. So the .22 rim will rest on the "barrel" (Adapter) as its supposed to. Download the Full Illustration Here & Parts List http://www.mediafire.com/?wz28hyuihcxy0ti PARTS LIST A-218 Ander-Lign Compression Coupling A-845 6" Brass Pipe A-819 Pipe Cap 5" 25 Turn Coil Spring 18/20 Gauge 2 1 Inch Chromed Adapters (I Assume 1/4" Center) 1 Hex Bit (The One that goes into Those Screwdrivers with different bits) 1 Drill 1 Drill bit but what size? (That's the 2% YOU need to figure out) 1 .22 caliber Barrel * I bought a 3" 410 to .22lr Gun Adapter (For the barrel) You can Either Drill one form Solid Stock OR use a Cut down Piece of .22 Caliber Barrel. REMEMBER to add that LIP if your lathing one! SO the Compression Fittung has something to hold. **Its the same dimensions of 410 Shell! ================================================================== I believe that's Everything **Video of THIS being Fired: http://www.youtube.com/watch?v=sZ6GTK7rzDE